Not a diamond; appears to be a glass simulant, resin cast, or synthetic quartz displaying significant surface wear, internal flow lines, and optical distortions.

Not a diamond; appears to be a glass simulant, resin cast, or synthetic quartz displaying significant surface wear, internal flow lines, and optical distortions. · Emerald cut / Rectangular step cut

Poor Cut

Not a diamond; appears to be a glass simulant, resin cast, or synthetic quartz displaying significant surface wear, internal flow lines, and optical distortions. - Emerald cut / Rectangular step cut

Carat

Cannot be accurately estimated visually due to unknown material density and lack of standardized depth measurements, roughly estimated at 4.0 - 6.0 carats equivalent volume.

Color

Fancy brownish-orange with iridescent play of color (likely due to surface coating or thin-film interference)

Clarity

Included / Poor (numerous internal flow lines, swirl marks, gas bubbles, and prominent scratches)

Shape

Emerald cut / Rectangular step cut

Overall Assessment

The examined item is conclusively not a diamond. It exhibits macroscopic characteristics typical of a glass simulant or polymer cast with an applied iridescent coating and heavy surface degradation.

Cut Quality

Poor

Brilliance

Very low; light transmission is heavily scattered and distorted by internal imperfections

Fire

Artificial dispersion due to surface coatings or internal optical interference rather than genuine crystalline dispersion

Scintillation

Poor; lacks sharp flash-light patterns, showing dead zones and erratic reflections

Proportions

Non-standard proportions with uneven step-cut faceting angles

Symmetry

Poor (asymmetrical facet junctions and rounding)

Polish

Poor (visible scratches, abrasions, and dull facet edges)

Fluorescence

Indeterminate from visual assessment alone

Inclusions

Prominent curved striations, swirl patterns, and potential gas bubbles indicative of non-crystalline or synthetic manufacture

Blemishes

Heavy surface scratching, abrasions along girdle, and surface-reaching fractures or wear marks

Origin

Man-made simulant (glass, plastic, or composite material)

Treatment Detection

Surface coating likely applied to create iridescence; internal swirl patterns indicate casting or glass-forming processes

Estimated Value

Minimal decorative or costume jewelry value (under $20 USD)

Certification Estimate

Would not receive certification from major gemological laboratories (GIA, AGS, IGI) as a diamond

Investment Potential

None; holds no monetary or resale value as a gemstone

Similar Diamonds

None, as this object shares no gemological properties with genuine diamonds

Setting Suggestions

Not recommended for fine jewelry settings due to softness, vulnerability to scratching, and lack of durability

Care & Maintenance

Keep away from harsh chemicals, abrasives, and high heat; clean gently with mild soap and warm water if made of glass

Interesting Facts

The swirling internal patterns visible under magnification strongly resemble flow lines found in melted glass or synthetic resins rather than crystal growth structures

Identified on 8/17/2026
Not a diamond; appears to be a glass simulant, resin cast, or synthetic quartz displaying significant surface wear, internal flow lines, and optical distortions. Emerald cut / Rectangular step cut | Diamond Identifier